MOR for inner diameter (Configurator)

With the help of this tool you will get to the request in only 3 steps.
The creation of the match code is for orientation. Additional technical adjustment may be necessary.

Step 1:

Please enter here the groove dimensions in the free fields and finish with ‚Enter‘.
Supportingly, in the table below you will find the sizes that can be finished with the corresponding groove dimensions.

[mm]
[mm]
[mm]
CSR [mm]
Nominal cross-section
D [mm]
Groove depth
W [mm]
Groove width
ODR [mm]
Outer diameter ring
OD [mm]
Outer diameter groove
Metal O-Ring MOR Installation space Performance
Nominal
cross-section
Performance
index
Wall thickness Outer diameter
ring
diametrical
clearance
Groove depth Groove width Radius Pressing load
(Guide values)
Springback
(Guide values)
CSR
mm
Code Wt
mm
Ø ODR min.
mm
Z
mm
D +0,1
mm
W min.
mm
R max.
mm
F
ca. N/mm
SB
ca. mm
0,89 w 0,15 6 0,20 0,65* 1,4 0,25 70 0,01
1,57 w 0,25 15 0,25 1,15 2,3 0,35 110 0,03
1,57 s 0,36 15 0,25 1,15 2,3 0,35 230 0,03
2,39 w 0,25 25 0,30 1,9 3,2 0,5 60 0,05
2,39 s 0,46 25 0,30 1,9 3,2 0,5 210 0,03
3,18 w 0,25 50 0,40 2,55 4,2 0,75 40 0,07
3,18 s 0,51 50 0,40 2,55 4,2 0,75 170 0,04
3,96 w 0,41 75 0,60 3,2 5,2 1,25 75 0,10
3,96 s 0,51 75 0,60 3,2 5,2 1,25 115 0,08
4,78 w 0,51 100 0,70 3,85 6,4 1,3 95 0,10
4,78 s 0,64 100 0,70 3,85 6,4 1,3 160 0,08
6,35 w 0,64 160 0,75 5,1 8,9 1,5 110 0,15
6,35 s 0,81 160 0,75 5,1 8,9 1,5 190 0,10
9,53 w 0,97 300 1,00 8,3 12,7 1,5 170 0,15
9,53 s 1,24 300 1,00 8,3 12,7 1,5 290 0,12
12,7 w 1,27 800 1,25 11,1 16,5 1,5 200 0,20
12,7 s 1,65 800 1,25 11,1 16,5 1,5 370 0,18

Please select the Ring material from the list. To do this, click on the desired line:

Ring material Code Material no.
SS321 3 1.4541
Inconel 600 4 2.4816
Inconel X-750 5 2.4669

Other materials on request.

Please select the Design from the list. To do this, click on the desired line:

Design Code
normal NP
self-energizing inside SI
pressure filled PF

Please select the Coating from the list. To do this, click on the desired line:

Coating Code max. temperature
Tin Z 200°C
PTFE P 290°C
Silver S 430°C (650°C*)
Copper C 930°C
Gold G 930°C
Nickel N 1200°C
without O

* Only valid for non-oxidizing media.
Other materials on request.

Please select the Coating thickness from the list. To do this, click on the desired line:

Coating thickness Code
0,01 - 0,03 mm L
0,03 - 0,05 mm M
0,05 - 0,07 mm H

Other coating thicknesses on request.

TOP ?

Data protection information *