MUO (Configurator)
With the help of this tool you will get to the request in only 3 steps.
The creation of the match code is for orientation. Additional technical adjustment may be necessary.
Step 1:
Please enter here the groove dimensions in the free fields and finish with ‚Enter‘.
Supportingly, in the table below you will find the sizes that can be finished with the corresponding groove dimensions.
| Metal O-Ring MUO | Installation space | Performance | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Nominal cross-section |
Performance index |
Wall thickness | Inner diameter ring |
diametrical clearance |
Groove depth | Groove width | Radius | Pressing load (Guide values) |
Springback (Guide values) |
|
| CSR mm |
Code | Wt mm |
Ø IDR min. mm |
Z mm |
D mm |
Tol. mm |
W min. mm |
R max. mm |
F ca. N/mm |
SB ca. mm |
| 2,39 | w | 0,25 | 30 | 0,15 | 1,90 | +0,10 | 3,20 | 0,50 | 25 | 0,28 |
| 3,18 | w | 0,38 | 45 | 0,20 | 2,55 | +0,10 | 4,20 | 0,75 | 30 | 0,35 |
| 3,96 | w | 0,41 | 65 | 0,25 | 3,20 | +0,10 | 5,20 | 1,25 | 25 | 0,46 |
| 4,78 | w | 0,51 | 70 | 0,30 | 3,85 | +0,15 | 6,40 | 1,30 | 25 | 0,70 |
| 5,60 | w | 0,51 | 80 | 0,35 | 4,50 | +0,15 | 7,30 | 1,30 | 20 | 0,80 |
| 6,35 | w | 0,64 | 120 | 0,40 | 5,05 | +0,20 | 8,50 | 1,50 | 30 | 0,85 |
| 9,53 | w | 0,97 | 300 | 0,58 | 7,70 | +0,30 | 12,70 | 1,50 | 45 | 0,90 |
| 12,70 | w | 1,27 | 600 | 1,77 | 10,20 | +0,30 | 16,50 | 1,50 | 60 | 1,20 |
Mentioned performance guide values are valid for seals made from Inconel 718 work hardened.
Other sizes not listed in table available on request.