MCI-F (Configurator)

With the help of this tool you will get to the request in only 3 steps.
The creation of the match code is for orientation. Additional technical adjustment may be necessary.

Step 1:

Please enter here the groove dimensions in the free fields and finish with ‚Enter‘.
Supportingly, in the table below you will find the sizes that can be finished with the corresponding groove dimensions.

[mm]
[mm]
[mm]
CSR [mm]
Nominal cross-section
D [mm]
Groove depth
W [mm]
Groove width
ODR [mm]
Outer diameter ring
OD [mm]
Outer diameter groove
Metal O-Ring MCI-F Installation space Performance
Nominal
cross-section
Performance
index
Wall thickness Outer diameter
ring
diametrical
clearance
Groove depth Groove width Radius Pressing load
(Guide values)
Springback
(Guide values)
CSR
mm
Code Wt
mm
Ø ODR min.
mm
Z
mm
D +0,1
mm
W min.
mm
R max.
mm
F
ca. N/mm
SB
ca. mm
1,57 w 0,15 15 0,16 1,25 2,3 0,35 80 0,08
1,57 s 0,15 15 0,16 1,25 2,3 0,35 180 0,06
2,39 w 0,25 20 0,24 1,90 3,2 0,50 150 0,10
2,39 s 0,25 20 0,24 1,90 3,2 0,50 320 0,08
3,18 w 0,38 25 0,32 2,55 4,2 0,75 145 0,15
3,18 s 0,38 25 0,32 2,55 4,2 0,75 290 0,12
3,96 w 0,41 35 0,40 3,20 5,2 1,25 150 0,20
3,96 s 0,41 35 0,40 3,20 5,2 1,25 320 0,16
4,78 w 0,51 75 0,48 3,85 6,4 1,30 190 0,22
4,78 s 0,51 75 0,48 3,85 6,4 1,30 420 0,18
6,35 w 0,64 100 0,64 5,10 8,5 1,50 330 0,30
6,35 s 0,64 100 0,64 5,10 8,5 1,50 560 0,26
9,53 w 0,97 300 0,95 7,70 12,7 1,50 510 0,40
9,53 s 0,97 300 0,95 7,70 12,7 1,50 810 0,32
12,7 w 1,27 600 1,25 10,20 16,5 1,50 640 0,55
12,7 s 1,27 600 1,25 10,20 16,5 1,50 920 0,46

Please select the Spring material from the list. To do this, click on the desired line:

Spring material Code Material no.
Elgiloy E 2.4711
Inconel X-750 5 2.4669
Inconel 718 7 2.4668

Please select the Ring material from the list. To do this, click on the desired line:

Ring material Code Material no.
SS304 1 1.4306
Inconel X-750 5 2.4669
Inconel 718 7 2.4668

Other materials on request.

Please select the Heat treatment from the list. To do this, click on the desired line:

Heat treatment Code Description
HT 1 1 work hardened
HT 2 2 age hardened
HT 3 3 Solution annealing + precipitation hardened SC
HT 4 4 Solution annealing + precipitation hardened Std
HT 5 5 Heat treatment NACE MR 0175

Please select the Coating from the list. To do this, click on the desired line:

Coating Code max. temperature
Tin Z 200°C
PTFE P 290°C
Silver S 430°C (650°C*)
Copper C 930°C
Gold G 930°C
Nickel N 1200°C
without O

* Only valid for non-oxidizing media.
Other materials on request.

Please select the Coating thickness from the list. To do this, click on the desired line:

Coating thickness Code
0,01 - 0,03 mm L
0,03 - 0,05 mm M
0,05 - 0,07 mm H

Other coating thicknesses on request.

TOP ?

Data protection information *

Mandatory fields are marked with an *.